IRSST - Institut de recherche Robert-Sauvé en santé et en sécurité du travail

According to Decree 280-2024 published on February 28, 2024, in the Gazette officielle du Québec, the amendment to the Appendix 1 of the Regulation respecting occupational health and safety (RSST, RLRQ, c. S-2.1, r. 13) will come into force on March 14, 2024. These regulatory changes have not yet been incorporated into the current Substance Data Sheets of the Sampling Guide for Air Contaminants in the Workplace. An update is currently underway and will be available as soon as possible. Consequently, the information contained in the data sheets of substances modified or added in Decree 280-2024 is partially inaccurate or incomplete. Please consult our infoLABO (in French only) for more details. Please contact our client service: [email protected] for further information.

Acrylic acid  

French name in the regulation: Acide acrylique
CAS : 79-10-7

Exposure Standards in RROHS regulation

Permissible exposure values (PEV)
ppm mg/m3 f/cc Notes
TWAEV 2 5,9 - -
STEV - - - -
Ceiling - - - -
Carcinogenicity Sensitizer
Simple asphyxiantPercutaneous
Prohibited useProhibited recirculation
Minimum exposureExplosion hazard
Ototoxic

TWA adjustment for unusual work schedules

1B : No adjustment

CNESST – Toxicological Index Service

Consult REPTOX file: Acrylic acid

Analysis:

Acide acrylique

Recommended method by the IRSST:
Method: OSHA - PV2005
Sampling device: Two 708 anasorb tubes
Parameters:
Flow rate: 0,1 L/min
TWA sampling volume: 24 L
STEL sampling volume: -
Remarks: There is a possibility of polymerization in the presence of polymerization initiators in the atmosphere. At the end of sampling, the front tube must be separated from the back tube to avoid migration. Reseal each end of the tubes. Clearly identified the paired tubes. Contact the IRSST before sampling.
Principle: High performance liquid chromatography with UV detection (HPLC-UV)
OSHA, Chemical information Manual, Acrylic acid et methacrylic acid, Method PV 2005, 1996.