IRSST - Institut de recherche Robert-Sauvé en santé et en sécurité du travail

According to Decree 280-2024 published on February 28, 2024, in the Gazette officielle du Québec, the amendment to the Appendix 1 of the Regulation respecting occupational health and safety (RSST, RLRQ, c. S-2.1, r. 13) will come into force on March 14, 2024. These regulatory changes have not yet been incorporated into the current Substance Data Sheets of the Sampling Guide for Air Contaminants in the Workplace. An update is currently underway and will be available as soon as possible. Consequently, the information contained in the data sheets of substances modified or added in Decree 280-2024 is partially inaccurate or incomplete. Please consult our infoLABO (in French only) for more details. Please contact our client service: [email protected] for further information.

Methyl ethyl ketone (MEK)  

French name in the regulation: Méthyl éthyl cétone
CAS : 78-93-3

Exposure Standards in RROHS regulation

Permissible exposure values (PEV)
ppm mg/m3 f/cc Notes
TWAEV 50 150 - -
STEV 100 300 - -
Ceiling - - - -
Carcinogenicity Sensitizer
Simple asphyxiantPercutaneous
Prohibited useProhibited recirculation
Minimum exposureExplosion hazard
Ototoxic

TWA adjustment for unusual work schedules

1B : No adjustment

CNESST – Toxicological Index Service

Consult REPTOX file: Methyl ethyl ketone (MEK)

Analysis:

Méthyl éthyl cétone

Method: IRSST - 25-3
Sampling device:
Sampling media required:
#IRSSTDescription
2190 Anasorb 747 140/70mg

Parameters:
Flow rate: Max: 0,2 L/min
TWA sampling volume: 10 L
STEL sampling volume: 3 L
Principle: Gas chromatography with flame ionization detection (GC-FID)
Precision (%): 3,4
Minimum reported value: 30 µg
Remarks: An activated charcoal tube 100/50 mg (#2120) may be used if the samples are refrigerated immediately after sampling of a maximum duration of 15 minutes. This alternative is recommended if other organic substances must be analyzed simultaneously on the same sample, only if the risk of underestimating the concentration of methyl ethyl ketone is assumed by the user. In this case the analytical uncertainty (Cva) is 4.4%. The analysis can be done by gas chromatography couple with mass spectrometry (CG-MS, IRSST method # 369); in this case the analytical uncertainty (Cva) is 4.5%.
IRSST. "Analyse de la méthyléthylcétone dans l'air". Méthode 25-3. Méthodes analytiques. Montréal: IRSST, 1995.

Methyl ethyl ketone (MEK)

Method: IRSST - 416
Sampling device:
Sampling media required:
#IRSSTDescription
2696 566AT passive dosimeter

Parameters:
Flow rate: 0,0112 L/min
TWA sampling volume: -
STEL sampling volume: -
Remarks: For the monitors, the flow must be considered as being a sampling rate.
Principle: Gas chromatography with flame ionization detection (GC-FID)
Precision (%): 2,2
Minimum reported value: 8 µg
IRSST. "Dosage des composés organiques volatils dans l'air par dosimétrie passive". Méthode 416. Non publiée.