IRSST - Institut de recherche Robert-Sauvé en santé et en sécurité du travail

According to Decree 280-2024 published on February 28, 2024, in the Gazette officielle du Québec, the amendment to the Appendix 1 of the Regulation respecting occupational health and safety (RSST, RLRQ, c. S-2.1, r. 13) will come into force on March 14, 2024. These regulatory changes have not yet been incorporated into the current Substance Data Sheets of the Sampling Guide for Air Contaminants in the Workplace. An update is currently underway and will be available as soon as possible. Consequently, the information contained in the data sheets of substances modified or added in Decree 280-2024 is partially inaccurate or incomplete. Please consult our infoLABO (in French only) for more details. Please contact our client service: [email protected] for further information.

Acrylonitrile  

French name in the regulation: Acrylonitrile
CAS : 107-13-1
Synonyms: Cyanure de vinyle

Exposure Standards in RROHS regulation

Permissible exposure values (PEV)
ppm mg/m3 f/cc Notes
TWAEV 2 4,3 - -
STEV - - - -
Ceiling - - - -
Carcinogenicity C2 Sensitizer
Simple asphyxiantPercutaneous
Prohibited useProhibited recirculation
Minimum exposure Explosion hazard
Ototoxic

TWA adjustment for unusual work schedules

III : Weekly adjustment

CNESST – Toxicological Index Service

Consult REPTOX file: Acrylonitrile

Analysis:

Acrylonitrile

Recommended method by the IRSST:
Method: NIOSH - 1604
Sampling device: Activated charcoal tube 100/50 mg
Parameters:
Flow rate: 0.01-0.2 L/min
TWA sampling volume: 20 L
STEL sampling volume: -
Remarks: Acrylonitrile must be sampled specifically due to the desorption solvent. This substance is not analyzed by our laboratories. It might be possible that the analysis be performed by another laboratory. Please contact the IRSST before sampling.
Principle: Gas chromatography with flame ionization detection (GC-FID)
NIOSH Manual of Analytical Methods, 4th ed., Method 1604 : Acrylonitrile, 1994.