Optimization of inertial sensor-based motion capturing for magnetically distorted field applications

Schiefer C., Ellegast R. P., Hermanns I., Kraus T., Ochsmann E., Larue C. , Plamondon A.

Source : Journal of Biomechanical Engineering, vol. 136, no 12, 2014, 8 p

Single pose calibration with inertial measurement units (IMU subject calibration)

Robert-Lachaine X., Hakim Mecheri, Larue C. , Bellefeuille S. , Plamondon A.

Source : Proceeding of XIV International Symposium on 3D Analysis of Human Movement, Taipei, Taiwan, 2016 (p. 172-175). Retrieved from http://homepage.ntu.edu.tw/~xiv3dahm2016/uploads/3D-AHM%202016-Symposium%20Proceedings.pdf

Effect of task complexity and duration when validating an inertial system with an optoelectronic system

Robert-Lachaine X., Hakim Mecheri, Larue C. , Plamondon A.

Source : Proceeding of 9th International Scientific Conference on the Prevention of Work-Related Musculoskeletal Disorders (PREMUS 2016), Toronto, ON, 2016 (pp. 15). Retrieved from https://premus2016.iwh.on.ca/doc/PREMUS2016_Book_of_Abstracts.pdf

Orientation drift compensation of inertial sensors in magnetically distorted field applications

Schiefer C., Ellegast R. P., Hermanns I., Kraus T., Ochsmann E., Larue C. , Plamondon A.

Source : Proceeding of 9th International Scientific Conference on the Prevention of Work-Related Musculoskeletal Disorders (PREMUS 2016), Toronto, ON, 2016 (pp. 14). Retrieved from https://premus2016.iwh.on.ca/doc/PREMUS2016_Book_of_Abstracts.pdf

Using inertial sensors to monitor workers’ trunk posture: the case of daycare workers

Dumas G., Plamondon A. , Diesbourg T.

Source : Proceeding of 9th International Scientific Conference on the Prevention of Work-Related Musculoskeletal Disorders (PREMUS 2016), Toronto, ON, 2016 (pp. 13). Retrieved from https://premus2016.iwh.on.ca/doc/PREMUS2016_Book_of_Abstracts.pdf

Evaluation of eight methods for aligning orientation of two coordinate systems

Hakim Mecheri, Robert-Lachaine X., Larue C. , Plamondon A.

Source : (2016). Journal of Biomechanical Engineering, 138(8). doi: doi:10.1115/1.4033719

Feasibility of quantifying the physical exposure of material handlers in the workplace with an inertial system

Plamondon A. , Larue C. , Robert-Lachaine X., Denis D. , Corbeil P., Delisle A.

Source : (2018). Communication présentée à 20th Congress of the International Ergonomic Association, Florence, Italie.

Accuracy and repeatability of single-pose calibration of inertial measurement units for whole-body motion analysis

Robert-Lachaîne X. , Hakim Mecheri, Larue C., Plamondon A.

Source : (2017). Gait & Posture, 54, 80-86. doi: 10.1016/j.gaitpost.2017.02.029

Feasibility of quantifying the physical exposure of materials handlers in the workplace with magnetic and inertial measurement units

Robert-Lachaîne X. , Larue C., Denis D. , Delisle A., Hakim Mecheri, Corbeil P., Plamondon A.

Source : (2020). Ergonomics, 63(3), 283-292. doi: 10.1080/00140139.2019.1612941

Validation of inertial measurement units with an optoelectronic system for whole-body motion analysis

Robert-Lachaîne X. , Hakim Mecheri, Larue C., Plamondon A.

Source : (2017). Medical & Biological Engineering & Computing, 55(4), 609-619. doi: 10.1007/s11517-016-1537-2

Effect of local magnetic field disturbances on inertial measurement units accuracy

Robert-Lachaîne X. , Hakim Mecheri, Larue C., Plamondon A.

Source : (2017). Applied Ergonomics, 63, 123-132. doi: 10.1016/j.apergo.2017.04.011

Offset correction when comparing 3D joint angles from two different motion capture systems

Hakim Mecheri, Robert-Lachaîne X. , Larue C. , Plamondon A.

Source : Communication présentée à 4th International Digital Human Modeling Symposium (DHM2016), Montréal, QC, 2016 (p. 1-4).